HEAT SINKS - LAMINATED SHEETS - COPPER COMPOSITES - MarkeTech International

Laminated Sheets - Copper/Moly/Copper
Click here for pdf data sheet (104k)

Cu/MoCu sheets have very high in plane conductivity provide by layers of copper and low thermal expansion provided by the inner layer of molybdenum. These laminated sheets have the ability to spread the heat from a concentrated heat source and then dissipate the heat through the layers. They Also:

• Offer an economical solution to many applications
• Are non magnetic
• Will not delaminate and can resist repeated 850° C cycles
• Available in several standard ratios and many thicknesses for tailored TE machining
• Are lower weight than WCu composite materials
• Are available in larger and thinner sheet size
• Utilize copper that is easily plated
• Can be machined by EDM

Tungsten/Copper Infiltrated Composites
Click here for pdf data sheet (104k)

WCu composites are made by infiltrating, under vacuum, uniform controlled porous blocks of tungsten with molten copper. This results in a material with an interconnected copper matrix that has high thermal conductivity in all axis, low thermal expansion, and good electrical conductivity, Copper content can range between 10% and 25%.

Molybdenum/Copper Composites
Click here for pdf data sheet (104k)

MoCu alloys are made by sintering molybdenum and copper together. This results in a heat sink of lower density, low CTE and excellent thermal conductivity. Other features include:

• Sheets can be stamped when moly is less than 70%
• Non magnetic
• Relatively low density
• Can be gold or nickel plated